What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
Just about every person will have his or her own opinion involving Hot Water Heater Repair.
Several contemporary houses make use of an electrical hot water heater for their heating unit, as a result of its comfort as well as ease of use. Nonetheless, much like any other electrical appliances, troubles may arise with its use, all of a sudden. It can be truly frustrating to awaken to a chilly shower instead of a warm one or having your bathroom with water that isn't hot adequate and even too warm. Whatever the situation may be, hot water heater issues can be quite aggravating. Thankfully, we have actually made a listing of possible remedies to your water heater concerns. There are a variety of elements that could cause most of these issues, maybe a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you turn off the major power supply for safety. Whatever the trouble is, getting it repaired need to not position way too much of a problem if you adhere to these steps:
Call A Specialist:
If after replacing all damaged parts and also resetting your temperature, the hot water heater still isn't functioning, you may require to speak to an expert plumber for an expert point of view. The problem with your heating unit could be that the cold and hot faucets have been switched or it might be undersized for the quantity of hot water needed in your home. Whatever the instance might be, a professional plumber would aid address the problem.
Inspect Your Power Supply:
As fundamental as this might seem, it is very needed. Without ample power, your hot water heater will not function. So the first thing to do when your water unexpectedly retires is to validate that it isn't a power problem. Check if the fuse is blown out or the breaker stumbled. If the breaker is the concern, merely turn it off and on once again. Replace any type of busted or damaged fuse. Check the device with power after these adjustments to see if it's now working.
Check Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm sufficient, you might require to examine the temperature level setups on your top thermostat. Ensure the circuit breaker is switched off before doing anything. Open the access panel and press the red button for temperature reset above the thermostat. This ought to help heat the water. Turn the circuit breaker back on and check if the problem has actually been resolved.
Check the Heating Element in the Water Heater:
If it's not a power trouble, after that attempt looking into your burner if it is still functioning. Examine each of your burner to make sure the issue isn't with any of them. If any of them is defective, change that part and after that inspect whether the hot water is back on.
Conclusion
Water heater troubles are not constantly significant. A number of them are due to small concerns like a blown fuse or damaged heating element. Replacing the faulty parts need to suffice. Nevertheless, if you are still not able to resolve the problem, give a call to your local plumber ahead to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you enjoyed our post on How to Troubleshoot and Repair an Electric Water Heater. Thank you for spending some time to read through our article. Do you know about somebody who is excited about the subject? Do not hesitate to promote it. I am grateful for your time. Come back soon.
This Page
Report this page